Codejock Forums Homepage
Forum Home Forum Home > Codejock Products > Visual C++ MFC > Toolkit Pro
  New Posts New Posts RSS Feed - Version 17.0 Sneak Peek
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Topic ClosedVersion 17.0 Sneak Peek
 Post Reply Post Reply Page  12>
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Topic: Version 17.0 Sneak Peek
    Posted: 12 May 2015 at 11:57am
I will be posting some sneak peak screen shots of the upcoming version 17.0 beta that we will be releasing soon.

The first screen shot is shows off some of Calendar enhancements that have been made.  We have completely rewrote the Calendar theme engine to make it easier to introduce new themes.  We have also added "from" and "to" arrows for multiday events, and improved the overall appearance for Calendar and Date Picker Office 2013 themes including event selection which now shows bolder border and sizing grippers.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 12 May 2015 at 12:47pm
We have significantly updated the Office 2013 themes introducing new Access, Excel, One Note, Outlook, Power Point, Publisher and Word themes for all controls.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 12 May 2015 at 12:51pm
In addition to the new Office 2013 themes added, we also introduced a Light Gray and Dark Gray version for each color scheme.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 12 May 2015 at 12:59pm
We also introduced new Visual Studio 2015 Light, Blue and Dark themes for all controls with this release.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 12 May 2015 at 1:28pm
Also, with the Visual Studio 2015 themes we introduced state colors similar to how Visual Studio will change the frame and status bar colors when you open a new solution or run the debugger.  This can be set to any color of your choosing.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 12 May 2015 at 1:35pm
In addition to the Office 2013 enhancements, you can now set a background image for the ribbon, the same way Microsoft Office does, Tree Rings, Circuit and Calligraphy backgrounds are shown here.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
davbrat View Drop Down
Groupie
Groupie
Avatar

Joined: 30 September 2009
Location: California
Status: Offline
Points: 59 		Direct Link To This Post Posted: 12 May 2015 at 5:27pm
Very, vVery cool!

Any love in 17.0 for the XAML controls?
Product: Xtreme SuitePro (ActiveX) version 18.4.0 Platform: Windows XP SP2+ & Windows 7 (32bit & 64Bit)
Windows 8/8.1/10

Language: Clarion 5.0/5.5/6.3/7.3/8/9/9.1/10
Back to Top
cpede View Drop Down
Senior Member
Senior Member


Joined: 13 August 2004
Location: Denmark
Status: Offline
Points: 666 		Direct Link To This Post Posted: 13 May 2015 at 5:12am
Wow, this will blow away my .NET developer friends, - soon I will have the coolest apps. :-)

Can't wait for trying this out.

-cpede
Product: Xtreme ToolkitPro (24.0.0)
Platform: Windows 10 (x64)
Language: Visual Studio 2017 (C++)
Back to Top
Fredrik View Drop Down
Senior Member
Senior Member


Joined: 22 June 2005
Status: Offline
Points: 235 		Direct Link To This Post Posted: 13 May 2015 at 9:42am
Very nice. 

Will it be possible to set custom colors on the Office 2013 themes like the Visual Studio 2015 themes? 

/ Fredrik
Windows 10, Visual Studio 20157, Toolkit Pro 18.3.0
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 13 May 2015 at 9:53am
Originally posted by Fredrik Fredrik wrote:

Will it be possible to set custom colors on the Office 2013 themes like the Visual Studio 2015 themes?

The state colors are unique to the Visual Studio 2015 themes, but we could apply this to the Office 2013 themes as well if there is enough demand.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kanbang View Drop Down
Newbie
Newbie


Joined: 04 May 2014
Status: Offline
Points: 8 		Direct Link To This Post Posted: 16 May 2015 at 4:39am
great work！
Back to Top
kanbang View Drop Down
Newbie
Newbie


Joined: 04 May 2014
Status: Offline
Points: 8 		Direct Link To This Post Posted: 16 May 2015 at 4:40am
Originally posted by davbrat davbrat wrote:

Very, vVery cool!

Any love in 17.0 for the XAML controls?


The Xaml Trainer of you is really cool! where/how could I download it?
look forward to your reply
Back to Top
snarfblatt View Drop Down
Groupie
Groupie


Joined: 28 April 2008
Location: United States
Status: Offline
Points: 10 		Direct Link To This Post Posted: 18 May 2015 at 12:45pm
Looks good.. when do we get it? :) We are close to a new release of our product and there are some bugs in 16.4 I'm hoping are fixed in 17.0.
Back to Top
cluster View Drop Down
Groupie
Groupie


Joined: 22 January 2015
Status: Offline
Points: 91 		Direct Link To This Post Posted: 28 May 2015 at 11:04am
Nice! Is the release date already known?
Back to Top
fleg View Drop Down
Groupie
Groupie


Joined: 11 July 2012
Status: Offline
Points: 45 		Direct Link To This Post Posted: 29 May 2015 at 8:15am
I'm also expecting version 17.0, especially for better management of 4K screens.
If 17.0 Beta is going to be released soon (date?) when does the final 17.0 supposed to be delivered?

In addition of the new pretty themes, any list available for new features and bug fixes?
Back to Top
Alex G. View Drop Down
Groupie
Groupie


Joined: 22 December 2004
Location: Germany
Status: Offline
Points: 74 		Direct Link To This Post Posted: 08 June 2015 at 2:44am
Cool!

Any words about the necessary HIGH DPI support ?

Currently all icons are not scaled very well.

Alex
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 08 June 2015 at 1:50pm
Originally posted by Alex G. Alex G. wrote:

Any words about the necessary HIGH DPI support?

Yes, this is one of the areas that will be addressed with the next release.  We also recommend that you use pre-defined icons for various resolution rather than letting the framework scale them as some icons do not scale very well.  This is how other applications such as Word handle it.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 08 June 2015 at 3:30pm
I wanted to give everyone an update to where we are at with the next release.

We are currently working on finalizing a few outstanding issues and hope to have this completed within the next 2 weeks.

I believe the following to be a realistic timeline for the upcoming v17.0 release schedule:

Beta 1:
Release Date – Week Of: 06-22-2015
Two week cycle.

During this time:

  • Finish outstanding issues.
  • Fix reported problems.
  • Continue testing.

Beta 2:
Release Date – Week Of: 07-06-2015
Two week cycle.

During this time:

  • Fix reported problems.
  • Continue testing.

Final Release:
Release Date – Week Of: 07-20-2015

Thanks for everyone's patience!
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 08 June 2015 at 3:35pm
Originally posted by fleg fleg wrote:

In addition of the new pretty themes, any list available for new features and bug fixes?

When the first beta is released there will be release notes included that contains a complete list of features and updates.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
snarfblatt View Drop Down
Groupie
Groupie


Joined: 28 April 2008
Location: United States
Status: Offline
Points: 10 		Direct Link To This Post Posted: 09 June 2015 at 4:39pm
Thanks for the update on the release schedule!
Back to Top
MacW View Drop Down
Senior Member
Senior Member


Joined: 26 June 2007
Status: Offline
Points: 253 		Direct Link To This Post Posted: 11 June 2015 at 4:32am
Calendar looks nice. But since I don't use it, I'm looking forward to the other promised changes in the next release.

I'm really waiting for the numerous High-DPI fixes you have promised. Many of my users work on screens with 150% to 250% (144 - over 200 DPI, compared to the 96 DPI you hardcoded in several places). Having 3200 pixels on a 13" screen (Dell) is no fun if the application you work with messes up the font sizes.

Just had the case today that a CXTPControlComboBox on a 200% screen produces unreadable text because each line folds half-way into the previous line. As far as I could tell, this control uses a font derived from the system icon font (???) and so should work. But does not. Maybe using the default Windows control font size or the menu font size would be better.

Panel icons use a hard-coded size of 16 pixels. No way to change them, even if my application is configured to use 32 or even 64 pixel icons.

My code automatically adapted to all high-DPI screens, but I had to spend far too much time making XTP work - and in some places could not make it work at all. This is annoying for me and the customers, and expensive as well. I really hope that your new update gets all this fixed without breaking existing code.

I'm also looking forward to proper DPI-aware XAML code. So far I need to manually parse all XAML produced by my users and manually correct the font sizes etc. to match the DPI of the output device context. You have hard-coded 96 DPI in your XAML source code.

I would also very much like to have the ability in markup to use point sizes (or maybe something like 'em)' for Margins, Padding etc. Using pixel values for these measurements makes it impossible to write XAML markup that adapts to different DPI settings in the output device context. This should not be hard to do I hope.

I consider the (albeit limited) XAML support in XTP indeed as a great feature, because it makes a lot of things easier or more flexible. So far unfortunately only if you work on monitors with 96 DPI - which seem to die out quickly.
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 11 June 2015 at 1:32pm
> Calendar looks nice. But since I don't use it, I'm looking forward to the other promised changes in the next release.

I agree with this sentiment in the strongest of terms. Theme improvements are "nice to have", but proper high DPI support is critical for all modern Windows applications.
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 11 June 2015 at 8:39pm
Hello everybody,

This is just to confirm that the upcoming version introduces full DPI support for the following components: CommandBars, Ribbon, all controls, Shortcut Bar, Docking Pane, Task Panel,  Tab Manager and Markup. Note, for backward compatibility reasons CommandBars and Markup will have DPI support disabled by default. In order to enable DPI support for command bars use this code after a theme is applied:

pCommandBars->GetPaintManager()->m_bAutoResizeIcons = TRUE;
pCommandBars->GetCommandBarsOptions()->SetDPIScallingOptions(TRUE);

In order to enable DPI support for markup set a new bDpiAware argument of XTPCreateMarkupContext to TRUE, or call CXTPMarkupContext::SetDpiAware method.

We appreciate a thorough testing and reporting any issues found in the upcoming beta version.

Thank you.
Regards,
  Alexander
Back to Top
MacW View Drop Down
Senior Member
Senior Member


Joined: 26 June 2007
Status: Offline
Points: 253 		Direct Link To This Post Posted: 12 June 2015 at 2:58am
Souds good. What does

pCommandBars->GetPaintManager()->m_bAutoResizeIcons = TRUE;

do, exactly?

When I feed in 16 or 32 pixel icons and enable this option, the command war will do what with these icons? I want to avoid blurry icons... Currently my app uses 16,24,32,48 pixel icon sets and uses them with control bars depending on options set by the user and the system DPI setting. How does "auto icon scale" fit into such a scenario?

You mention TabManager. I assume I can use icons > 16 pixels now? If so, how?

When I enable this new XAML option with CXTPMarkupContext::SetDpiAware this affects which operations? Only font size calculations? Or are other measures in the markup also scaled to meet the DPI settings of the device content? If so, which?

Is there a way to specify margins, padding or distances with a non-pixel unit that is automatically scaled (pt or em)? Just scaling font sizes given in pt unints is unfortunately not enough. We need a non-pixel unit for other distances/sizes too. Did you consider that in your new code?

I apologize for asking these questions here, but your documentation is usually not very helpful. A flag like "m_bAutoResizeIcons" is usually documented as "Enable or disable auto resize icons" - which does not tell us much. When to use it? How to use it? How are the icons resized? To which size? How to feed in different base icon sizes to avoid scaling and blurry results?...
Back to Top
lrenoux View Drop Down
Groupie
Groupie


Joined: 20 April 2009
Status: Offline
Points: 62 		Direct Link To This Post Posted: 12 June 2015 at 11:30am
Hi, 

Thanx for the update.

Does the calendar on x64 platform will work with MAPI and Outlook  2013 x64. Currently, it doesn't. Have you added some improvments to the calendar like being able to add contacts to a meeting for example.

Regards
Back to Top
davbrat View Drop Down
Groupie
Groupie
Avatar

Joined: 30 September 2009
Location: California
Status: Offline
Points: 59 		Direct Link To This Post Posted: 12 June 2015 at 2:31pm
Dear Santa,
I could really use Drag & Drop support for the PropertyGrid.

Thanks,

db
Product: Xtreme SuitePro (ActiveX) version 18.4.0 Platform: Windows XP SP2+ & Windows 7 (32bit & 64Bit)
Windows 8/8.1/10

Language: Clarion 5.0/5.5/6.3/7.3/8/9/9.1/10
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 12 June 2015 at 9:21pm
>>> When I feed in 16 or 32 pixel icons and enable this option, the command war will do what with these icons? I want to avoid blurry icons... Currently my app uses 16,24,32,48 pixel icon sets and uses them with control bars depending on options set by the user and the system DPI setting. How does "auto icon scale" fit into such a scenario?
This option enables icons scaling, if your icon images have ICO format, not bitmaps, the most suitable size will be choosen during scaling. But if you want your icons to looks as sharp as possible you can disable this option. You can play with it in different DPI using the RibbonSample (Options -> Font) and see how it fits your needs and expectations. There is no really good trade-off in this case as only vector images would produce seamless scaling, which is definitely not a case here.

>>> You mention TabManager. I assume I can use icons > 16 pixels now? If so, how?
Same is true for tab manager.

>>> When I enable this new XAML option with CXTPMarkupContext::SetDpiAware this affects which operations?
It affects everything rendered by markup, including font sizes. And we preserved standard WPF behavior when it comes to DPI scaling (https://msdn.microsoft.com/en-us/library/ms748373.aspx - 'About Resolution and Device-Independent Graphics'), meaning it will scale Xpt font size.

>>> Is there a way to specify margins, padding or distances with a non-pixel unit that is automatically scaled (pt or em)? 
Please clarify what exactly you are asking about, some sample would be useful.

>>> .. but your documentation is usually not very helpful.
Unfortunately it is not detailed enough and we are aware of it and gradually provide more detailed descriptions to portions of code that we work with, so as before the best source of information is the code of the sample applications and the toolkit source code itself for more rigorous learning.


Thank you.
Regards,
  Alexander
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 12 June 2015 at 9:22pm
>>> Does the calendar on x64 platform will work with MAPI and Outlook  2013 x64
Unfortunately no work has been done in that direction so far.

Regards,
  Alexander
Back to Top
evoX View Drop Down
Senior Member
Senior Member
Avatar

Joined: 25 July 2007
Status: Offline
Points: 207 		Direct Link To This Post Posted: 14 June 2015 at 7:15am
Any plans to add a gauge control?

Like this
Product: Xtreme ToolkitPro 19.30
Platform: Windows 10 64bit
Language: Visual C++ (VS 2019)
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 14 June 2015 at 11:10am
Thanks for the details, Alexander. This information is encouraging.
Back to Top
apierini View Drop Down
Groupie
Groupie
Avatar

Joined: 25 June 2008
Location: Italy
Status: Offline
Points: 18 		Direct Link To This Post Posted: 15 June 2015 at 4:35am
Thanks, it looks promising.

What about Windows 10 / Office 2016 themes? In particular, what about the Office 2016 Colorful theme?

Andrea
Back to Top
MacW View Drop Down
Senior Member
Senior Member


Joined: 26 June 2007
Status: Offline
Points: 253 		Direct Link To This Post Posted: 15 June 2015 at 12:40pm
Originally posted by astoyan astoyan wrote:

Please clarify what exactly you are asking about, some sample would be useful.

I'm sorry if my comment was confusing. Your markup documentation is rather limited. Using it means looking up the sparse comments in your help file, then looking up the documentation of the parameters mentioned there in MSDN, then looking in your code which part of the official XAML feature you have actually implemented.

I mean when I specify something like

<Border Margin='4,4,4,4'>
  <TextBlock FontSize='12pt'>Some Text Here</TextBlock>
</Border>


I understand that your next release will scale the FontSize of 12pt according to the DPI settings of the output device context. Good.

But what about the Margin of the <Border> element. According to the XAML spec:

The default unit for a Thickness measure is device-independent unit (1/96th inch). You can also specify other units by appending the unit type strings cm, in, or pt to any measure.

It seems that the default unit for Margins or Padding in your XAML implementation is pixel, and that I can use pt in addition? 

<Border Margin='10pt,10pt,10pt,10pt'>


If you scale the FontSize, do you also scale other measures given in pt, cm or mm? Do you support pt, cm or mm for Margins, Padding, Rectangles, Width, Height etc. in the next release and do you scale these measures as well? Scaling only the FontSize will break existing XAML layouts otherwise. If the font's are suddenly twice as big on a 200% screen, Margins, Widths and Heights also need to grow accordingly, or existing markup will break.

(PS: You don't support Margin='10,10' which is valid).
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 15 June 2015 at 5:12pm
Originally posted by apierini apierini wrote:

What about Windows 10 / Office 2016 themes? In particular, what about the Office 2016 Colorful theme?

We have this on our TODO list, if not this release definitely 17.1. 
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 15 June 2015 at 5:14pm
Originally posted by evoX evoX wrote:

Any plans to add a gauge control?

Yes we do have plans on adding this soon, it is also on our TODO list and we have already started on the framework for such controls.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
evoX View Drop Down
Senior Member
Senior Member
Avatar

Joined: 25 July 2007
Status: Offline
Points: 207 		Direct Link To This Post Posted: 17 June 2015 at 8:05pm
Awesome!! I almost purchased the controls library from your competition, but I will wait for yours, I am sure it will be done much better just like your other controls.

also please don't forget to add font antialiasing to XAML textblock.
Product: Xtreme ToolkitPro 19.30
Platform: Windows 10 64bit
Language: Visual C++ (VS 2019)
Back to Top
Marco1 View Drop Down
Senior Member
Senior Member


Joined: 16 January 2004
Location: Germany
Status: Offline
Points: 251 		Direct Link To This Post Posted: 18 June 2015 at 7:53am
Originally posted by kstowell kstowell wrote:

and we have already started on the framework for such controls.
Please focus all your energy an 17.0 first. Unfortunately there is still no beta.
Back to Top
MacW View Drop Down
Senior Member
Senior Member


Joined: 26 June 2007
Status: Offline
Points: 253 		Direct Link To This Post Posted: 18 June 2015 at 1:05pm
I would welcome an answer to my XAML-related questions, if you find the time. I'm not interested in the calendar or gauge controls or Windows 10 / Office 16 themes at all. I prefer the basics to work correct first.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 19 June 2015 at 4:13pm
Originally posted by Marco1 Marco1 wrote:

Please focus all your energy an 17.0 first. Unfortunately there is still no beta.

I agree and that is exactly we are currently doing.  We have been working hard and so far I am pretty optimistic for being on track with Beta 1, it should be ready sometime next week.  I am not sure it will be Monday as originally planned, but defiantly by the end of the week, this is our goal.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 25 June 2015 at 5:14pm
Hi everyone,

As an update we are preparing the build for Beta 1 but ran into a small snag, our Code Signing certificate has expired and we cannot sign any of our binaries (.exe, .dll, .ocx) until we get the new cert.  We renewed this back in November of 2014, but did not realize our Duns and Bradstreet information was out dated because we moved our offices to a new location, so we could not get validated.

So now we are waiting for DnB to update their information so we can complete the validation process and get a new certificate issued.  We are working on providing them alternative means of verification but they are pretty strict on this.  DnB informed us that it may take as long as 14 days for a the information to be updated, but we are hopeful that we will not have to wait that long and they will accept our alternative documents.

So this is what is holding up our Beta release at the moment, I apologize for the delay, and I will let you all know as soon as we hear something.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
zaksoft View Drop Down
Senior Member
Senior Member
Avatar

Joined: 05 June 2003
Location: Italy
Status: Offline
Points: 162 		Direct Link To This Post Posted: 26 June 2015 at 6:15am
Cannot simply upload MFC beta sources for people that rebuild libs in meantime ?
 
(thus avoiding someone can think it's a code delay ?)
 
I've never used exe or dll from setup. If build tool is the problem we can confirm the execution.
VS2022 - MFC MBCS Statically linked

XTP 23.1 Static Link

---------------------------------------------------------

Davide Zaccanti - ZakSoft - www.zaksoft.com
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 26 June 2015 at 3:17pm
Hi Kirk,

Do we really need the XTP executables to be signed just for the beta? I wouldn't want to ship a product with them unsigned, but just for testing purposes.... don't really see the harm.

- Mark R.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 26 June 2015 at 4:39pm
Originally posted by markr markr wrote:

Do we really need the XTP executables to be signed just for the beta?

This probably wouldn't of been a big concern for our MFC clients, however I was a bit concerned about shipping the unsigned OCX files for our ActiveX clients.  The good news is we were able to get this whole mess resolved today and our new code signing cert has been issued.  We are doing a final build now for Beta 1 and should have the downloads ready by this weekend.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
rmcmanamy View Drop Down
Groupie
Groupie


Joined: 02 September 2009
Status: Offline
Points: 54 		Direct Link To This Post Posted: 27 June 2015 at 10:49am
Great to hear.  Can't wait to test out the new build.
Product: Xtreme SuitePro (ActiveX Unicode) version 22.0.0

Platform: Windows 11 (64bit)

Language: Visual Basic 6.0

Back to Top
calvi View Drop Down
Groupie
Groupie


Joined: 20 March 2004
Location: United Kingdom
Status: Offline
Points: 43 		Direct Link To This Post Posted: 29 June 2015 at 5:21am
As it supports VS 2015 themes, is it safe to assume that it can be built with the VS 2015 CTP edition?
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 29 June 2015 at 2:33pm
Originally posted by calvi calvi wrote:

As it supports VS 2015 themes, is it safe to assume that it can be built with the VS 2015 CTP edition?

Yes it does support VS 2015 however the installer does not have the integration option added yet we will be working on this for the final release.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 29 June 2015 at 2:34pm
Toolkit Pro, Suite Pro 17.0.0 Beta 1 Released
Customers who have an active maintenance subscription for any Toolkit Pro or Suite Pro product will find the beta download under My Account > Product Download. Select your product to see the download link for the current beta. We will announce additional beta releases using the RSS feed on our website and the Codejock Messenger alert that is installed with each product.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 06 July 2015 at 5:01pm
Originally posted by MacW MacW wrote:

I would welcome an answer to my XAML-related questions, if you find the time. I'm not interested in the calendar or gauge controls or Windows 10 / Office 16 themes at all. I prefer the basics to work correct first.

What have you found out now that the v17 beta is available? Does it answer your questions? I ask because I have the same ones, but haven't had time to dig yet.
Back to Top
McKloony View Drop Down
Senior Member
Senior Member
Avatar

Joined: 09 January 2007
Location: Germany
Status: Offline
Points: 340 		Direct Link To This Post Posted: 12 July 2015 at 7:08am
Will it be possible to add customIcons in Office 2013 Theme?
Product: Xtreme SuitePro (ActiveX) 16.2.5

Platform: XP / Windows 7

Language: Visual Basic 6.0 SP6
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 15 July 2015 at 9:07pm
Originally posted by kstowell kstowell wrote:

Beta 2:

Release Date – Week Of: 07-06-2015
Two week cycle.

What's the current ETA on BETA 2?

Regards,

Mark R.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 16 July 2015 at 2:27pm
Originally posted by markr markr wrote:

What's the current ETA on BETA 2?

We had some good feedback on Beta 1 so we are working hard on addressing those issues.  Realistically we are probably another 2 - 3 weeks out before we are ready for Beta 2.  This should address the majority of outstanding issues that have been brought to our attention.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 17 July 2015 at 11:23am
Originally posted by kstowell kstowell wrote:

Realistically we are probably another 2 - 3 weeks out before we are ready for Beta 2.  This should address the majority of outstanding issues that have been brought to our attention.

Just my opinion, but I'd prefer to see a second beta sooner, even it it means releasing it with some "known issues". This would help to keep your v17 testers engaged.

- Mark R.
Back to Top
Marco1 View Drop Down
Senior Member
Senior Member


Joined: 16 January 2004
Location: Germany
Status: Offline
Points: 251 		Direct Link To This Post Posted: 19 July 2015 at 9:31am
Originally posted by kstowell kstowell wrote:

Realistically we are probably another 2 - 3 weeks out before we are ready for Beta 2.
Really? Are there sooo many bugs or are they sooo hard to fix? Three weeks between the betas should just be fine, IMHO as professional programmer.
Please release something soon, and release a further RC1 and RC2 perhaps...
Back to Top
Marco1 View Drop Down
Senior Member
Senior Member


Joined: 16 January 2004
Location: Germany
Status: Offline
Points: 251 		Direct Link To This Post Posted: 20 July 2015 at 9:37am
Speaking about bug fixes in beta versions: It would be really helpful to have a powerful customer bug/issue tracking system, like e.g. Asterisk has (jira, mantisbt etc.).
As customer I can see and track if an issue is fixed in a certain (beta) release and additional infos can be exchanged without polluting this forum.
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 27 July 2015 at 8:02am
How far off is Beta 2 from posting? We are trying to update our products to the released VS 2015 and CodeJock is our last roadblock.
Thanks.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 27 July 2015 at 6:46pm
Originally posted by dmorris dmorris wrote:

How far off is Beta 2 from posting? We are trying to update our products to the released VS 2015 and CodeJock is our last roadblock.
Thanks.

We know everyone is anxious for the next Beta, and we have been working hard to address all of the feed back that we have received.   We are getting very close and are looking at the week of August 9th for the release of Beta 2.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 28 July 2015 at 10:43am
Kirk,

> We are getting very close and are looking at the week of August 9th for the release of Beta 2.

Unfortunately, this means I'll have to abandon the v17 code base and revert back to v16.3.  :-(

That's too bad, because it sounds like Oleksandr has already fixed the v17 issues that matter most to me. Any chance of making an internal build available to those of us willing to live dangerously?

Regards,

Mark R.
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 28 July 2015 at 10:47am
Kirk,
Thanks for the update. Looking forward to the Beta...
Derek
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 13 August 2015 at 7:55am
Kirk,

Inquiring minds want to know... Are we going to see Beta 2 this week?

Thanks,
Derek
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 13 August 2015 at 3:53pm
Originally posted by dmorris dmorris wrote:

Inquiring minds want to know... Are we going to see Beta 2 this week?

We have 2 issues that we are trying to address first.  We are hoping to have this wrapped up by the weekend and begin BETA 2 builds on Monday.  Shouldn't be too much longer.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 14 August 2015 at 7:12am
Great! I'll inform the upper echelon and check back on Monday.
Thanks,
Derek
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 19 August 2015 at 10:26am
Kirk,

Looks like the 2 issues were bigger than first anticipated. How close are we to the next Beta?

Thanks,
Derek
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 19 August 2015 at 2:38pm
Originally posted by dmorris dmorris wrote:

Looks like the 2 issues were bigger than first anticipated. How close are we to the next Beta?

Here's an update regarding BETA 2.  It is in the final stages of building now (this takes several hours) and we are hoping to release it either tonight or sometime tomorrow.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 19 August 2015 at 2:50pm
Originally posted by kstowell kstowell wrote:

 Here's an update regarding BETA 2.  It is in the final stages of building now (this takes several hours) and we are hoping to release it either tonight or sometime tomorrow.


GREAT! Thanks!
Back to Top
terrym View Drop Down
Senior Member
Senior Member


Joined: 13 April 2007
Status: Offline
Points: 836 		Direct Link To This Post Posted: 20 August 2015 at 8:34am
Any news on Beta 2 please?
Thank you,
Terry Mancey

email terry@tmancey.ltd.uk | linkedin www.tmancey.ltd.uk | twitter @tmancey
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 20 August 2015 at 7:47pm
Originally posted by terrym terrym wrote:

Any news on Beta 2 please?

Beta 2 just released.  We also published an evaluation version that you can download if you don't have an active subscription.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
terrym View Drop Down
Senior Member
Senior Member


Joined: 13 April 2007
Status: Offline
Points: 836 		Direct Link To This Post Posted: 22 August 2015 at 2:32am
Latest beta 2, for Windows 10/VS 2015 causing following issue:

Severity

Code

Description

Project

File

Line

Error (active)


#error directive: "Unknown Visual Studio version"

On This Day in History

c:\Program Files (x86)\Codejock Software\MFC\Xtreme ToolkitPro v17.0.0.081715\Source\XTToolkitPro.h

243
Thank you,
Terry Mancey

email terry@tmancey.ltd.uk | linkedin www.tmancey.ltd.uk | twitter @tmancey
Back to Top
Marco1 View Drop Down
Senior Member
Senior Member


Joined: 16 January 2004
Location: Germany
Status: Offline
Points: 251 		Direct Link To This Post Posted: 22 August 2015 at 7:31am
In toolkit.h the definition for VS 2015 (version 1900) is just missing. Please add.
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 22 August 2015 at 9:09am
The static libs aren't building correctly for me in beta 2.

I selected all the build options in the deployment wizard, and couldn't link afterward. Looks like the static libs didn't get copied to the "libs" folder?

I'm using VS2015 but my project is configured to use the VS2013 toolset. Worked fine with beta 1.

- Mark R.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 22 August 2015 at 6:53pm
Originally posted by terrym terrym wrote:

Latest beta 2, for Windows 10/VS 2015 causing following issue

Thanks for bringing this to our attention.  As a work around open XTToolkit.h and at line 241 add the following lines of code:

#if _MSC_VER == 1900
#define _XTPLIB_VISUALSTUDIO_VERSION "vc140"
#endif

This should resolve the problem.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 23 August 2015 at 2:06am
Originally posted by markr markr wrote:

The static links aren't building correctly for me in beta 2

Thanks markr, we will make sure the problem is addressed.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 08 September 2015 at 12:26pm
Originally posted by kstowell kstowell wrote:

Final Release: Release Date – Week Of: 07-20-201

Is there a realistic chance of v17 being released this month? Our customers are getting restless, and we really need v17 since it resolves so many problems with the v16.x code base.

- Mark R.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 08 September 2015 at 4:25pm
Originally posted by markr markr wrote:

Is there a realistic chance of v17 being released this month?

There is a pretty good probability this will happen.  We need to get a BETA 3 released first to make sure immediate issues have been addressed with BETA 2, then if all looks good we are planning on a final release shortly there after.

If not this month definitely the first part of October for sure.

BETA 3 should be ready by next week, we are just wrapping up a few more details before publishing it.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 09 September 2015 at 4:42pm
Windows 10 Themes and Codejock Question:

I'm running with the latest Codejock Beta/Visual Studio 2015/Windows 10 configuration. I have an "Aero Lite" theme leftover from Windows updates that seems to work fine when I switch to it. However, none of the Codejock samples run when this theme is active. All samples "freeze" up during initialization when setting the theme for codejock controls. Call Stack looks like:

     [External Code]     
     [Frames below may be incorrect and/or missing, no symbols loaded for ntdll.dll]     
     ToolkitPro1700vc140UD.dll!CXTPColorManager::Instance() Line 188     C++
     ToolkitPro1700vc140UD.dll!XTPColorManager() Line 785     C++
     ToolkitPro1700vc140UD.dll!GetXtremeColor(unsigned int nIndex) Line 787     C++
>     ToolkitPro1700vc140UD.dll!CXTPColorManager::RefreshGradientColors() Line 456     C++
     ToolkitPro1700vc140UD.dll!CXTPColorManager::RefreshColors(int bResetCustomColors) Line 671     C++
     ToolkitPro1700vc140UD.dll!CXTPColorManager::CXTPColorManager() Line 176     C++
     ToolkitPro1700vc140UD.dll!CXTPColorManager::Instance() Line 188     C++
     ToolkitPro1700vc140UD.dll!XTPColorManager() Line 785     C++
     ToolkitPro1700vc140UD.dll!RefreshXtremeColors(int bResetCustomColors) Line 476     C++
     ToolkitPro1700vc140UD.dll!CXTPButtonTheme::RefreshMetrics(CXTPButton * __formal) Line 134     C++
     ToolkitPro1700vc140UD.dll!CXTPButton::RefreshMetrics() Line 630     C++
     ToolkitPro1700vc140UD.dll!CXTPButton::SetTheme(XTPControlTheme eTheme) Line 680     C++
     ToolkitPro1700vc140UD.dll!CXTPButton::CXTPButton() Line 100     C++

Stepping through the code it freezes creating a static instance of an "CXTPColorManager". Stepping through a theme that works it's able to set the default theme because the "theme file" path contains "aero.msstyles". Of course the "Aero Lite" theme is in a different msstyles file so it ends up with an xtpSystemThemeUnknown theme. I think this has something to do with it freezing up.

My question: Should it work with themes outside of the Aero.msstyles? Either way it shouldn't lock up like it's doing now. You might already know about this issue. I'm pretty sure people are going to be running with old themes on Windows 10 that are left behind after upgrading.

Regards,
Derek Morris
Back to Top
lrenoux View Drop Down
Groupie
Groupie


Joined: 20 April 2009
Status: Offline
Points: 62 		Direct Link To This Post Posted: 17 September 2015 at 5:42am
It seems to be a little bit longer than expected. Have you a new ETA ?
Back to Top
maxxan View Drop Down
Groupie
Groupie


Joined: 15 July 2009
Status: Offline
Points: 49 		Direct Link To This Post Posted: 17 September 2015 at 9:04am
Will v17 have option for full screen backstage view like Office 2013 has?
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 18 September 2015 at 12:39pm
Originally posted by lrenoux lrenoux wrote:

It seems to be a little bit longer than expected. Have you a new ETA ?

We just posted Beta 3 for download a few days early, we were planning on releasing it this Monday.  You will see the download link on the same page as the Toolkit Pro and Suite Pro download link.  You will need an active subscription to download Beta 3.

We will be making an official announcement this weekend.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 22 September 2015 at 11:18am
CXTPButton (Radio Buttons not updating)
Running Beta 3 I have dialogs with Radio buttons (CXTPButton). I can click a different radio button and the previously checked radio button remains checked until I move the mouse over it. At that time it will refresh and show unchecked.

This allows the user to check down a list of radio buttons and they all appear to be checked. Not good! I can insert a "RedrawWindow" in the click event of every radio button but that shouldn't be necessary.

The "Controls" sample delivered with CodeJock has this same issue. Just click on the radio buttons labeled "Option 1" and "Option 2" and you will see what I mean.

Occurs on both Windows 7 and 10 (Debug and Release).

What is the solution?

Thanks,
Derek
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 22 September 2015 at 9:02pm
Thanks, Derek, for reporting this. It has definitely been overlooked. We'll fix this.
Back to Top
dmorris View Drop Down
Groupie
Groupie
Avatar

Joined: 27 July 2015
Location: Alabama, USA
Status: Offline
Points: 13 		Direct Link To This Post Posted: 23 September 2015 at 6:38am
Originally posted by astoyan astoyan wrote:

Thanks, Derek, for reporting this. It has definitely been overlooked. We'll fix this.


Thanks. Here's another bug that's new for Version 17:

Setting the theme on a CXTPComboBox in a dialogs OnInitDialog:

m_cboClassification.SetTheme(XTPControlTheme::xtpControlThemeOffice2000);

will ASSERT in InitFont() function. It's trying to pull the Codejock font from the resource but it's looking in MY DLL for the resource and fails. I believe it's trying to pull the dropdown triangle symbol out of the font because in release mode I'm not seeing the symbol on the dropdown button. Commenting out the line for now does not get the ASSERT and the combo draws fine with the default theme.

Perhaps a little AFX_MANAGE_STATE(AfxGetStaticModuleState()) is needed??

Thanks,
Derek
Back to Top
davbrat View Drop Down
Groupie
Groupie
Avatar

Joined: 30 September 2009
Location: California
Status: Offline
Points: 59 		Direct Link To This Post Posted: 23 September 2015 at 10:03am
Is it just me or is the Calendar control the only ActiveX control that currently supports the new Office2013/VS themes?

CJ 17.0.0 beta 3
Clarion 10
Product: Xtreme SuitePro (ActiveX) version 18.4.0 Platform: Windows XP SP2+ & Windows 7 (32bit & 64Bit)
Windows 8/8.1/10

Language: Clarion 5.0/5.5/6.3/7.3/8/9/9.1/10
Back to Top
adrien View Drop Down
Senior Member
Senior Member


Joined: 30 April 2007
Location: New Zealand
Status: Offline
Points: 449 		Direct Link To This Post Posted: 23 September 2015 at 6:15pm
We use XAML in report control cells.

Now with Beta 3 we are seeing raw XAML in there.  Was fine in Beta 1.

Also it's still messing with the selected items (the blue) when you add and remove records with grouped / sorted control.
http://www.wingate.com
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 24 September 2015 at 10:30am
Originally posted by adrien adrien wrote:

Now with Beta 3 we are seeing raw XAML in there.

Seems to be working alright here. Can you share a XAML snippet that you're using?

- Mark R.
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 26 September 2015 at 1:28pm
Originally posted by adrien adrien wrote:

We use XAML in report control cells.
Now with Beta 3 we are seeing raw XAML in there.  Was fine in Beta 1.

Also it's still messing with the selected items (the blue) when you add and remove records with grouped / sorted control.

Please note that XAML has been significantly revised starting from 17.0 beta 2, the parser has been completely re-written and made strictly conformant to XML standards, while the previous version allowed incorrect XML syntax in some scenarios. Most likely your issue is one of:
1. there is no space between value of an attribute and the next attribute name, e.g.: Text="Value"Margin="0,0,0,0"
2. If you use XML namespace "x:" now you have to declare this namespace in the root element, global  namespace has too be declared too, e.g.:
<Grid xmlns='http://schemas.microsoft.com/winfx/2006/xaml/presentation' xmlns:x='http://schemas.microsoft.com/winfx/2006/xaml'>
<Border x:Name='Background' />
</Grid>

Check if it helps and provide your XAML code if it doesn't. If you use C++ the actual problem description will be printed out in output log in debugger for Debug configuration.

Regards,
  Alexander Stoyan
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 26 September 2015 at 1:42pm
Originally posted by dmorris dmorris wrote:

Originally posted by astoyan astoyan wrote:

Thanks, Derek, for reporting this. It has definitely been overlooked. We'll fix this.


Thanks. Here's another bug that's new for Version 17:

Setting the theme on a CXTPComboBox in a dialogs OnInitDialog:

m_cboClassification.SetTheme(XTPControlTheme::xtpControlThemeOffice2000);

will ASSERT in InitFont() function. It's trying to pull the Codejock font from the resource but it's looking in MY DLL for the resource and fails. I believe it's trying to pull the dropdown triangle symbol out of the font because in release mode I'm not seeing the symbol on the dropdown button. Commenting out the line for now does not get the ASSERT and the combo draws fine with the default theme.

Perhaps a little AFX_MANAGE_STATE(AfxGetStaticModuleState()) is needed??

Thanks,
Derek

Thank you, Derek, for reporting this, however we were unable to reproduce it. It must be depends on on previous actions or theme states, please try to make any of our samples fail in the same way or add necessary modification to it, create a support ticket and upload the sample with instructions.
And please clarify, are you using shared or static configuration?

Thank you.
Regards,
  Alexander Stoyan
Back to Top
calvi View Drop Down
Groupie
Groupie


Joined: 20 March 2004
Location: United Kingdom
Status: Offline
Points: 43 		Direct Link To This Post Posted: 27 September 2015 at 6:00am
Bug in CalendarDemo.

I built CalendarDemo 64-bit debug with VS 2013, after changing it to use MFC in a static library with the Unicode character set (why isn't Unicode the default?).  The build completed with the following error:

1>  Performing Custom Build Tools
1>  The system cannot find the file specified.
1>C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V120\Microsoft.CppCommon.targets(170,5): error MSB6006: "cmd.exe" exited with code 1.
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

I couldn't see any custom build settings in its properties, but CalendarDemo.exe was created.

After selecting the Visual Studio 2015 Blue theme, it crashed on line 500 of XTPRibbonMarkupTheme.cpp.  Manually copying VisualStudio2015.dll to the styles subfolder fixed the crash.
Back to Top
adrien View Drop Down
Senior Member
Senior Member


Joined: 30 April 2007
Location: New Zealand
Status: Offline
Points: 449 		Direct Link To This Post Posted: 27 September 2015 at 6:25pm
Thanks, there was a missing space.  I didn't think whitespace was semantically significant in XML...
http://www.wingate.com
Back to Top
calvi View Drop Down
Groupie
Groupie


Joined: 20 March 2004
Location: United Kingdom
Status: Offline
Points: 43 		Direct Link To This Post Posted: 29 September 2015 at 3:37pm
Why isn't xtpPaneThemeVisualStudio2015 defined?
Back to Top
astoyan View Drop Down
Admin Group
Admin Group
Avatar

Joined: 24 August 2013
Status: Offline
Points: 302 		Direct Link To This Post Posted: 29 September 2015 at 7:18pm
Originally posted by calvi calvi wrote:

Bug in CalendarDemo.

I built CalendarDemo 64-bit debug with VS 2013, after changing it to use MFC in a static library with the Unicode character set (why isn't Unicode the default?).  The build completed with the following error:

1>  Performing Custom Build Tools
1>  The system cannot find the file specified.
1>C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V120\Microsoft.CppCommon.targets(170,5): error MSB6006: "cmd.exe" exited with code 1.
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

I couldn't see any custom build settings in its properties, but CalendarDemo.exe was created.

After selecting the Visual Studio 2015 Blue theme, it crashed on line 500 of XTPRibbonMarkupTheme.cpp.  Manually copying VisualStudio2015.dll to the styles subfolder fixed the crash.


This one was a known issue and has been already fixed for the next update.
Back to Top
krienp View Drop Down
Newbie
Newbie


Joined: 02 August 2013
Status: Offline
Points: 2 		Direct Link To This Post Posted: 30 September 2015 at 1:55pm
Any idea on a timeframe for the release v17 build? We'd like to make sure there's enough time for us to test before we have another release of our product. Obviously the initial plans have shifted, and that's not a problem, but rough timeframe would be nice. A month from now or even 6 weeks might be doable, but end of the year probably not and we'd have to go ahead and start making contingency plans.
Back to Top
lrenoux View Drop Down
Groupie
Groupie


Joined: 20 April 2009
Status: Offline
Points: 62 		Direct Link To This Post Posted: 01 October 2015 at 2:16am
Ok ...

A lot of my flow graphs couldn't be read correctly now with the new microsoft parser. I understand the goal, but what function must be called before setting a caption name to a connection point when a user rename it with a text like that "Caption & Error" ? This must be changed in "Caption &amp; Error" and must be saved in "Caption &amp;amp; Error" to be read correctly next time. Should this function must be called automatically in CXTPFlowGraphControl::RenameConnectionPoint ?

L.

EDIT :

Even if flow graph file is saved in UTF-8 format, the new parser doesn't care and doesn't handle it. All connected point with a caption which contains UTF-8 characters will be skipped.

It's possible to override the default class CXTPFlowGraphEditItem to avoid some problems in edition but some  virtual functions are missing like CancelLabelEdit (called from Reposition) in control class.

The integration of JS in markup is nice. I try to activate it in a flow graph, but only one markup context is handled in the flow graph control for all nodes, removing the interest.
Back to Top
angelsoriasanagustin View Drop Down
Groupie
Groupie


Joined: 16 September 2015
Location: Spain
Status: Offline
Points: 46 		Direct Link To This Post Posted: 28 October 2015 at 12:04pm
Any idea about the release date ?

Thanks!
Back to Top
adrien View Drop Down
Senior Member
Senior Member


Joined: 30 April 2007
Location: New Zealand
Status: Offline
Points: 449 		Direct Link To This Post Posted: 16 November 2015 at 6:33pm
Hi Kirk

any updates?  We're all software devs here and we all know about how schedules can slip, but it would be good to get an update.

Cheers

Adrien
http://www.wingate.com
Back to Top
SvenC View Drop Down
Groupie
Groupie


Joined: 02 February 2007
Status: Offline
Points: 79 		Direct Link To This Post Posted: 19 November 2015 at 6:36am
17.0 rc1 would be very welcome ;-)
--
SvenC

Toolkit Pro 15.3.1, 16.2.4, 16.3.1, 16.4.0, 17.2.0, 17.3.0, 18.0.1, 18.2 with VC++ 2010, 2012, 2013, 2015, 2017
Back to Top
Alopez View Drop Down
Newbie
Newbie
Avatar

Joined: 02 November 2015
Location: Owosso
Status: Offline
Points: 6 		Direct Link To This Post Posted: 19 November 2015 at 10:09am
Hi, we wanted to give everyone an update on the schedule for 17.0 product release.  We are in the final stages of preparing a release candidate for version 17.0.  We plan on releasing this by the end of this month.  The RC version will be in testing phase for 2 weeks and if no significant issues are reported we will schedule a final release for the third week in December.
Anthony Lopez, Technical Support
CODEJOCK SOFTWARE SOLUTIONS
Back to Top
jis View Drop Down
Groupie
Groupie


Joined: 28 September 2015
Status: Offline
Points: 11 		Direct Link To This Post Posted: 20 November 2015 at 4:06am
Excellent, thanks for the update :)
Back to Top
GazillaByte View Drop Down
Newbie
Newbie


Joined: 02 July 2012
Location: United States
Status: Offline
Points: 3 		Direct Link To This Post Posted: 30 November 2015 at 7:21pm
I'd love to see a word-cloud control and a timeline control (like Facebook).

These have been asked for before, and nobody else has them for MFC.

Would be happy to pay extra for them.
Back to Top
kstowell View Drop Down
Admin Group
Admin Group


Joined: 25 January 2003
Location: MIchigan, USA
Status: Offline
Points: 496 		Direct Link To This Post Posted: 11 December 2015 at 11:38am
Release Candidate for v17 has been published.  This will be the last of the betas that we publish prior to the final release version.  We are looking to publish the final v17 product release by the end of December.
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<
Back to Top
lrenoux View Drop Down
Groupie
Groupie


Joined: 20 April 2009
Status: Offline
Points: 62 		Direct Link To This Post Posted: 11 December 2015 at 12:11pm
Great ! 

Thx.
Back to Top
Fredrik View Drop Down
Senior Member
Senior Member


Joined: 22 June 2005
Status: Offline
Points: 235 		Direct Link To This Post Posted: 14 December 2015 at 10:14am
There is a breaking change in the RC for us: we have CHtmlView derived controls in docking panes and when resizing the pane the whole application freezes. 

I remember the same issue before when Internet Explorer 9 was released but it was fixed in v.15. 

I have no suitable sample to show you right now, but since it worked in beta 3, perhaps you know what might cause the freezing in the RC? It freezes only if you try to resize a docked docking pane, not if you slide it out and resize it.
Windows 10, Visual Studio 20157, Toolkit Pro 18.3.0
Back to Top
markr View Drop Down
Senior Member
Senior Member


Joined: 01 August 2004
Status: Offline
Points: 443 		Direct Link To This Post Posted: 29 December 2015 at 10:36am
Originally posted by kstowell kstowell wrote:

We are looking to publish the final v17 product release by the end of December.

Kirk, are you still on track for the final v17 release release this week?

Regards,

Mark R.
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.266 seconds.