20 sec delay on unload
Printed From: Codejock Forums
Category: Codejock Products
Forum Name: Syntax Edit
Forum Description: Topics Related to Codejock Syntax Edit
URL: http://forum.codejock.com/forum_posts.asp?TID=8653
Printed Date: 28 June 2024 at 6:02pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 20 sec delay on unload
Posted By: ijwelch
Subject: 20 sec delay on unload
Date Posted: 03 November 2007 at 1:27pm
|
There's a 20 second delay when I unload a VB6 form containing a SyntaxEdit control if: The form has been shown modally AND I've loaded a configfile If either of the above conditions have not been met then everything's fine. I'm not loading a file or setting text or anything-the syntaxedit is blank. This doesn't happen every time. maybe 20% of the time. The 20 second delay is the same every time it happens (it's ALWAYS 20 seconds). Any ideas? |
Replies:
Posted By: ijwelch
Date Posted: 05 November 2007 at 11:07pm
|
On further testing I discovered that this problem only occurs when the dialog is shown in response to a Codejock Pushbutton click. I've uploaded a zip containing 2 projects. Project 1 uses VB button and all is ok. Project 2 uses Codejock Pushbutton control and the delay on form unload occurs intermittently. Can someone from Codejock please take a look. You'll need to click the buttons to show and close the dialog a few times. Sometime the problem occurs 1st time, sometimes it takes 10 times. Thanks in advance. uploads/20071105_230605_Test.zip - uploads/20071105_230605_Test.zip |
Posted By: flauzer
Date Posted: 06 November 2007 at 5:19am
|
ijwelch,
I can't reproduce the error...
Have you tried to re-register OCX ???
|
Posted By: ijwelch
Date Posted: 06 November 2007 at 9:11am
|
Thanks for checking flauzer. I've tried everything. Re-registering. Stopping all other processes/application. I just keep getting the following:  Again, this is only when: 1. Syntax edit is shown on modal dialog 2. Config file is loaded 3. Modal dialog is shown from Codejock Pushbutton_Click I'm open to the idea that it's just my PC but I'm doubting it. If any of the above 3 conditions are not met then everything's fine. If anybody has any ideas or if you check if this happens on your system then I'd be grateful. Thanks |
Posted By: AndreiM
Date Posted: 08 November 2007 at 9:41am
|
Hello ijwelch,
I reproduced this problem and hope fix it.
Update will be ready soon. ------------- Regards, Andrei Melnik |
Posted By: Oleg
Date Posted: 08 November 2007 at 11:09am
|
Hi,
Please write to support@codejock.com , we will send you update to test. ------------- Oleg, Support Team CODEJOCK SOFTWARE SOLUTIONS |