Print Page | Close Window

VS 2017 Toolkit Project file incorrect for 18.3.0.

Printed From: Codejock Forums
Category: Codejock Products
Forum Name: Toolkit Pro
Forum Description: Topics Related to Codejock Toolkit Pro
URL: http://forum.codejock.com/forum_posts.asp?TID=23633
Printed Date: 23 December 2024 at 2:46am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: VS 2017 Toolkit Project file incorrect for 18.3.0.
Posted By: lviolette
Subject: VS 2017 Toolkit Project file incorrect for 18.3.0.
Date Posted: 20 April 2018 at 11:47pm
If you open CodeJock\Xtreme ToolkitPro v18.3.0\Workspace\ToolkitPro\ToolkitPro_vc150.sln in VS 2017.
Then go to Configuration Manager.

Choose "Unicode Release | x64" in the Active Solution Configuration/Platform.
Note that it shows the following:
Codejock.ToolkitPro.Shared - Unicode Release - x64
Codejock.ToolkitPro.Static - Static Unicode Release - x64

Now choose "Unicode Debug | x64" in the Active Solution Configuration/Platform.
Note that it shows the following:
Codejock.ToolkitPro.Shared - Unicode Debug - x64
Codejock.ToolkitPro.Static - Dynamic Unicode Debug - x64

Codejock.ToolkitPro.Static suddenly went to "Dynamic" Unicode Debug.  I would expect it to go to "Static" Unicode Debug.

Anyone else see this?  I believe it should go to Static Unicode Debug.



-------------
L. Violette
Monolith
www.lith.com
Xtreme Toolkit Pro v22.1.0



Replies:
Posted By: lviolette
Date Posted: 23 April 2018 at 2:35pm
I posted this in the general forum.  But I think it was the wrong place to post this as it's specific to a problem with Toolkit Pro.

Open main CodeJock solution file in VS 2017:
Xtreme ToolkitPro v18.3.0\Workspace\ToolkitPro\ToolkitPro_vc150.sln

Go to Configuration Manager.

Choose "Unicode Release | x64" in the Active Solution Configuration/Platform.
Note that it shows the following:
  • Codejock.ToolkitPro.Shared - Unicode Release - x64
  • Codejock.ToolkitPro.Static - Static Unicode Release - x64

Now choose "Unicode Debug | x64" in the Active Solution Configuration/Platform.
Note that it shows the following:
  • Codejock.ToolkitPro.Shared - Unicode Debug - x64
  • Codejock.ToolkitPro.Static - Dynamic Unicode Debug - x64

Codejock.ToolkitPro.Static suddenly went to "Dynamic" Unicode Debug.  I would expect it to go to "Static" Unicode Debug.

Anyone else see this?  I believe it should go to Static Unicode Debug.  Can anyone confirm this isn't my setup and what this should be set to?



-------------
L. Violette
Monolith
www.lith.com
Xtreme Toolkit Pro v22.1.0


Posted By: olebed
Date Posted: 24 April 2018 at 2:57am
Hello,

For "[Unicode] Debug/Release" have sense only configuration of  Codejock.ToolkitPro.Shared.

Codejock.ToolkitPro.Static project used only for "Static/Dynamic [Unicode] Debug/Release" compilations.

I always use separately 
Codejock.ToolkitPro.Shared and Codejock.ToolkitPro.Static projects.

Your changes can be introduced only to be consistent.

Regards,
 Oleksandr Lebed



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net