COM Version 16.2 Sneak Peek
Printed From: Codejock Forums
Category: Codejock Products
Forum Name: Suite Pro
Forum Description: Topics Related to Codejock Suite Pro
URL: http://forum.codejock.com/forum_posts.asp?TID=21687
Printed Date: 21 November 2024 at 7:24pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: COM Version 16.2 Sneak Peek
Posted By: SuperMario
Subject: COM Version 16.2 Sneak Peek
Date Posted: 31 May 2013 at 1:51pm
|
Hello Everyone, We are very close to releasing version 16.2 for ActiveX COM, some of the new things you will see are the new Office 2013 theme, Visual Studio 2012 theme and Flowgraph Control. Note we will also release an update for MFC which will be mainly fixes to 16.1. Here is a sneak peek of the COM samples:       |
Replies:
Posted By: ScottW
Date Posted: 01 June 2013 at 9:15am
 
|
Posted By: davbrat
Date Posted: 03 June 2013 at 11:35am
|
Will the PGrid support Drag and Drop? ------------- Product: Xtreme SuitePro (ActiveX) version 18.4.0 Platform: Windows XP SP2+ & Windows 7 (32bit & 64Bit) Windows 8/8.1/10 Language: Clarion 5.0/5.5/6.3/7.3/8/9/9.1/10 |
Posted By: McKloony
Date Posted: 08 June 2013 at 12:18pm
|
Are there any other changes other than the introduction of Office 2013 styles?
------------- Product: Xtreme SuitePro (ActiveX) 16.2.5 Platform: XP / Windows 7 Language: Visual Basic 6.0 SP6 |
Posted By: ElvisM
Date Posted: 11 June 2013 at 1:13pm
|
Thanks you Mario.Please, have you the date? (hards words). ------------- Product: Xtreme SuitePro (ActiveX) version 17.2 Platform: Windows 10 64bits Language: Visual Basic 2015 |
Posted By: SuperMario
Date Posted: 11 June 2013 at 4:41pm
| Not yet, but code is frozen and being tested. So real soon :-) |
Posted By: flauzer
Date Posted: 12 June 2013 at 5:58am
| Amazing work!!!!! |
Posted By: Willowmaster
Date Posted: 14 June 2013 at 9:38am
|
Just curious, but why does it take so long to create the ActiveX version? Is it because you wait for the first bugs and comments you get from the Toolkit pro users? ------------- Product: Xtreme SuitePro (ActiveX) version 15.3.1 Platform: Windows XP (32bit) - SP 3 (on VMWare) Language: Visual Basic 6.0 |
Posted By: SuperMario
Date Posted: 16 June 2013 at 11:04pm
| This was the only time they were not released at the same time. |
Posted By: Willowmaster
Date Posted: 17 June 2013 at 3:34am
|
Ah. I didn't know. Still the same question for this release then. ------------- Product: Xtreme SuitePro (ActiveX) version 15.3.1 Platform: Windows XP (32bit) - SP 3 (on VMWare) Language: Visual Basic 6.0 |
Posted By: SuperMario
Date Posted: 17 June 2013 at 9:27am
| Will be at the same time |
Posted By: jpbro
Date Posted: 17 June 2013 at 2:21pm
|
16.2 appears to be released? I downloaded and am trying it out, but I haven't seen an official announcement, so is it ready for distribution? Looks good so far, BTW. ------------- Product: Xtreme SuitePro (ActiveX) version 16.2.6 Platform: Windows XP - SP3 Language: Visual Basic 6.0 SP6 |
Posted By: moe188
Date Posted: 18 June 2013 at 6:30am
|
Hi, Installed the evaluation version of activex, but unable to run the demo. I receive error "can't activate". any idea hoe to fix this error. Thank you. I am using :Windows 7, visual basic 6 ------------- Visual Baisc 6 SP6 Windows XP Pro Sp3, Windows 7 Codejock Xtreme SuitePro ActiveX 15.1.3 |
Posted By: SuperMario
Date Posted: 18 June 2013 at 8:49am
| You must have an internet connection on the pc you are installing. |
Posted By: ABuenger
Date Posted: 18 June 2013 at 9:11am
Yes, website is now updated as well. ------------- Codejock support |
jpbro wrote:Posted By: moe188
Date Posted: 18 June 2013 at 4:57pm
|
SuperMario My pc is always connected to the Internet so I don't see no reason for this error. Please help becuause I am interested. Thank you ------------- Visual Baisc 6 SP6 Windows XP Pro Sp3, Windows 7 Codejock Xtreme SuitePro ActiveX 15.1.3 |
Posted By: McKloony
Date Posted: 19 June 2013 at 2:12am
|
I have downloaded the new release yesterday. If I try to start any sample i get the message: "can't activate". What does that mean? ------------- Product: Xtreme SuitePro (ActiveX) 16.2.5 Platform: XP / Windows 7 Language: Visual Basic 6.0 SP6 |
Posted By: SuperMario
Date Posted: 19 June 2013 at 11:02am
| Everyone, please re-download the eval and re-install. The problem is now fixed. |
Posted By: jpbro
Date Posted: 19 June 2013 at 12:14pm
|
WARNING! Be careful with 16.2 if you use the following properties of the ReportControl, there appears to be regressions: PaintManager.ForceDynamicMarkupForCell = True Setting Metrics.Text with markup strings in BeforeDrawRow event no longer displays as markup PaintManager.SetPreviewIndent Indent no longer honoured unless called *AFTER* .Populate method (used to work when called before .Populate). PaintManager.ShadeSortColumn=False Sorted columns *always* shaded unless called *AFTER* .Populate method (used to work when called before .Populate). I've opened support tickets, but I wanted to warn fellow users. ------------- Product: Xtreme SuitePro (ActiveX) version 16.2.6 Platform: Windows XP - SP3 Language: Visual Basic 6.0 SP6 |
Posted By: jpbro
Date Posted: 19 June 2013 at 12:42pm
|
It looks like a other PaintManager properties don't take effect until after Populate is called (which wasn't an issue pre-16.2). Just found that GroupRowTextBold fails now. ------------- Product: Xtreme SuitePro (ActiveX) version 16.2.6 Platform: Windows XP - SP3 Language: Visual Basic 6.0 SP6 |
Posted By: jpbro
Date Posted: 19 June 2013 at 12:45pm
|
One more note: The PaintManager problems only seem to be a problem if the ReportControl.PaintManager.ColumnStyle = xtpColumnResource ------------- Product: Xtreme SuitePro (ActiveX) version 16.2.6 Platform: Windows XP - SP3 Language: Visual Basic 6.0 SP6 |
Posted By: jpbro
Date Posted: 19 June 2013 at 1:27pm
|
Workaround for the PaintManager regressions: First call .PaintManager.ColumnStyle = xtpColumnResource Then call .Populate Then call .PaintManager.<Other Properties you want to set> Then call .Populate again. ------------- Product: Xtreme SuitePro (ActiveX) version 16.2.6 Platform: Windows XP - SP3 Language: Visual Basic 6.0 SP6 |
Posted By: SuperMario
Date Posted: 19 June 2013 at 2:07pm
|
Hi, Please see the online version of the release notes, there is also important notes for commandbars: IMPORTANT: The way the new themes work the paintmanager settings are reset when a theme is set. Because of this you will need to set any paintmanager settings AFTER you set the theme and or column style. Each theme is derived from the paintmanager so when a new theme is set the old settings will be lost.
|
Posted By: iandavo
Date Posted: 20 June 2013 at 2:01am
| 16.2.0 looks good, except for the poxy date picker control which is STILL just a wrapper around the ancient Windows Common Controls version that's been with us almost unchanged since Windows 3.1... No way can anyone put that unthemed piece of c**p onto a modern form with everything else themed! Please CodeJock, when will you bring out a themed date picker? |
Posted By: SuperMario
Date Posted: 20 June 2013 at 3:38am
| why not use the datepicker from the calendar? |
Posted By: iandavo
Date Posted: 20 June 2013 at 5:27am
| Because this is NOT a date picker at all but a month-view calendar. |
Posted By: iandavo
Date Posted: 20 June 2013 at 6:47am
|
Posted By: SuperMario
Date Posted: 20 June 2013 at 9:12am
| It can be made to look like one. See the DatePicker sample. Also do you add a manifest and run the exe? |
Posted By: iandavo
Date Posted: 20 June 2013 at 7:18pm
|
Yes, it can be made to look like one - if you do the manifest bit (which I note there doesn't seem to be any significant documentation on in anything CodeJock supplies) and write a bunch of code to perform the same actions, using a combobox and a calendar date picker, that a proper control would do behind the scenes... and then there's that really annoying flash as the combo drops its list down and closes it back up again when you close the picker portion... The fact that a knowledgeable developer can hack something together that'll roughly do the job doesn't address my point, which is how come we have to jump through all these hoops in the first place? Why bother including the Suite Date Picker at all when it's actually the same thing Microsoft have been supplying for a dozen years or more? Why is this control the only one that isn't done in a modern style? We should be able to select it from the toolbox, plonk it on a form, set a couple of properties and move on, instead of hand-coding all the stuff that makes it work and mucking around with InitCommonControls and Manifest files. End of rant... please just do the job properly for the next release and you'll make us happy! |
Posted By: moe188
Date Posted: 22 June 2013 at 5:33pm
|
I checked the the backstage it's great but the back arrow is missing. Is there anyway that this feature will be added? ------------- Visual Baisc 6 SP6 Windows XP Pro Sp3, Windows 7 Codejock Xtreme SuitePro ActiveX 15.1.3 |
Posted By: JamesH
Date Posted: 24 June 2013 at 7:22pm
| Does printing a graph using the 64-bit .ocx work in 16.2? |
Posted By: PHilA1
Date Posted: 04 July 2013 at 12:17pm
|
Is it just me or does this suite pro evaluation 16.2.0 have the new visual studio/office2013 styles missing? |
Posted By: SuperMario
Date Posted: 10 July 2013 at 2:29pm
| They are here: C:\Program Files (x86)\Codejock Software\ActiveX\Xtreme SuitePro ActiveX v16.2.0 (30 Day Trial)\Samples\Styles |