Calendar - CXTPCalendarDayView printing

Print Page | Close Window

CXTPCalendarDayView printing

Printed From: Codejock Forums
Category: Codejock Products
Forum Name: Calendar
Forum Description: Topics Related to Codejock Calendar
URL: http://forum.codejock.com/forum_posts.asp?TID=14999
Printed Date: 21 November 2024 at 3:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: CXTPCalendarDayView printing

Posted By: zitz
Subject: CXTPCalendarDayView printing
Date Posted: 18 August 2009 at 8:59am

Updated from Xtreme ToolkitPro v13.0.0
Printing of Day View worked wrong!
1. Print 2 pages - from 0:00 to 18:00 and from 10:00 to 18:00, i dont understand why? For what?? (You can see it at your CalendarDemoU.exe)
2. Wrong print if Scale Max Time == (DATE)1.0 (or 24:00)
I find at CalendarDemo that

AfxMessageBox(_T("MaxTime Hour should be > 0 and less 24"));

But it is wrong!!! MaxTime can be == 24:00! In previous versions all worked well!!!

How to fix it?????

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Replies:

Posted By: zitz
Date Posted: 18 August 2009 at 9:08am

I cant override printing functions because all is private!!!

private:
BOOL m_bDayViewMode;
 int m_nStartCell, m_nEndCell, m_nCurCell, m_nCellSteps; // internal cell's for printing loop
 CUIntArray m_PageStart;

What should I do?

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: zitz
Date Posted: 18 August 2009 at 9:59am

That decision, I already have post:

void CXTPCalendarDayView::SetScaleMaxTime(const COleDateTime dtNewScaleMaxTime)
{
    if (dtNewScaleMaxTime.GetStatus() == COleDateTime::valid)
    {
        m_dtTimeScaleMax = dtNewScaleMaxTime;
        if ( m_dtTimeScaleMax.m_dt > 1.0 ) m_dtTimeScaleMax = CXTPCalendarUtils::ResetDate( m_dtTimeScaleMax );
        CXTPCalendarControl::CUpdateContext updateContext(m_pControl, xtpCalendarUpdateRedraw);
    }
}

or even better


AFX_INLINE const COleDateTime CXTPCalendarUtils::ResetDate(const COleDateTime& dtDateTime)
{
    if ( (double)dtDateTime <= 1.0 ) return dtDateTime;
    return (DATE)_ResetDate_dbl((double)dtDateTime);
}

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 18 August 2009 at 10:45pm

Not big deal - set 23:59:59 - so you can't see 24 tick - just line

You don't need to overwrite this

BOOL m_bDayViewMode;
 int m_nStartCell, m_nEndCell, m_nCurCell, m_nCellSteps; // internal cell's for printing loop
 CUIntArray m_PageStart;

They are absolutely internal.

Set your timescale interval to 10min and try to print

>>AfxMessageBox(_T("MaxTime Hour should be > 0 and less 24")); - this is part of Sample app - OptionsDialogBar.cpp - and never called because combo set as example to 0 - 23:30 range!

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 4:10am

I try your CalendarDemoStatic.rar it is work with bugs too. Scroll bars at print preview does not working at all - crash.
But the problem is not this now, You do not understand :(
Let me explain how it works your calendar
If you set Scale Min Time = 8:00 and set Scale Max Time = 9:00, then the calendar will show you:
---- <- 8:00
- 8 -
---- <- 9:00
Only 2 cells (if dimension of half hour)
If you set Scale Min Time = 8:00 and set Scale Max Time = 8:59, then the calendar will show you:
---- <- 8:00
- 8 - <- 8:30
Only 1 cell (if dimension of half hour)

What i want? I WANT TO SEE:
--- <- 23:00
- 23
---- <- 24:00
Yes! It is just line!!!! But if you set 23:59:59 you see only:

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 4:49am

Vertical scroll bar working properly if page count properly calculated before scroll - compare

https://forum.codejock.com/uploads/DemoVersion/ReportPaneViewStatic.rar - https://forum.codejock.com/uploads/DemoVersion/ReportPaneViewStatic.rar

In contunue-print mode you can only use PageUp - PageDown to make one page step. After you reach last page - now your scrollbar will work propely

In MFC base class vertical scroll used only in Zoom-mode - it not suppose to move page in contunue-print mode

I f all your printing is 30 min scale interval with one page (13.0 and previous) - use

XTPCalendarControlView.cpp and XTPCalendarControlView.h from 13.0

btw - not сплиттер - scroller!

Where do you find "virtual" in this descriptor (XTPCalendarControlView.h) ?

private:

int m_nStartCell, m_nEndCell, m_nCurCell, m_nCellSteps; // internal cell's for printing loop

CUIntArray m_PageStart;

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 5:29am

Report printing is work fine! Calendar printing does not work.
Please see video:
uploads/20090819_050700_Calendar.zip - uploads/20090819_050700_Calendar.zip

Now i back to 13.0. Please pay attention to the my issues.
Maybe this will help with problem 24:00, found in the source
C:\Program Files\Codejock Software\MFC\Xtreme ToolkitPro v13.0.0\Source\Calendar\XTPCalendarDayViewEvent.cpp


    if (CXTPCalendarUtils::IsZeroTime(dtEndTime) &&
        !CXTPCalendarUtils::IsEqual(dtStartTime, dtEndTime))
    {
        spEnd.SetDateTimeSpan(0, 0, 0, 1);
    }
    int nTopCell = XTP_SAFE_GET1(GetViewGroup(), GetDateTimeCell(dtStartTime, FALSE), 0);
    int nBottomCell = XTP_SAFE_GET1(GetViewGroup(), GetDateTimeCell(dtEndTime - spEnd, TRUE), 0);

    // is event's Begin/End on cells borders
    COleDateTime dtStartCellTime = GetViewGroup()->GetViewDay()->GetView()->GetCellTime(nTopCell);
    COleDateTime dtEndCellTime = GetViewGroup()->GetViewDay()->GetView()->GetCellTime(nBottomCell);
    dtEndCellTime += GetViewGroup()->GetViewDay()->GetView()->GetCellDuration();

    COleDateTime dtStart_TimeOnly = CXTPCalendarUtils::ResetDate(dtStartTime);
    COleDateTime dtEnd_TimeOnly = CXTPCalendarUtils::ResetDate(dtEndTime - spEnd);
    dtEnd_TimeOnly += spEnd;

or that
C:\Program Files\Codejock Software\MFC\Xtreme ToolkitPro v13.0.0\Source\Calendar\XTPCalendarDayView.cpp



    COleDateTime stSTime = CXTPCalendarUtils::ResetDate(dtStart);
    COleDateTime stETime = CXTPCalendarUtils::ResetDate(dtEnd);

    if (CXTPCalendarUtils::IsZeroTime(stETime))
        stETime = CXTPCalendarUtils::SetTime_235959(stETime);

or that
C:\Program Files\Codejock Software\MFC\Xtreme ToolkitPro v13.0.0\Source\Calendar\XTPCalendarDayView.cpp




    BOOL bEndIsEnd = m_selectedBlock.dtEnd > m_selectedBlock.dtBegin;
    int nSelEndCell = GetCellNumber(CXTPCalendarUtils::ResetDate(m_selectedBlock.dtEnd -
        COleDateTimeSpan(0, 0, 0, bEndIsEnd ? 1 : 0)), bEndIsEnd);

and so on...

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: zitz
Date Posted: 19 August 2009 at 5:32am

Calendar printing functions is virtual, but i can not override them because its use private members:
virtual void OnBeginPrinting(CDC* pDC, CPrintInfo* pInfo);
virtual void OnEndPrinting(CDC* pDC, CPrintInfo* pInfo);
virtual void OnPrint(CDC* pDC, CPrintInfo* pInfo);
virtual void _OnPrint2(CDC* pDC, CPrintInfo* pInfo, CRect rcPrint);

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 5:37am

I see you movie - and I already explain you - use PgUp - PgDn if no Zoom used

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 5:43am

mdoubson wrote:

I see you movie - and I already explain you - use PgUp - PgDn if no Zoom used

Ok.
But how I will explain it to my users? Please not click here because all crashed?

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 5:45am

I need to disable VScroll if Zoom not set. Promice

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 6:00am

ok, but if page count properly calculated VScroll is must be enabled.
For example i use in report


void CMyXTPReportView::OnBeginPrinting( CDC* pDC, CPrintInfo* pInfo )
{
    ASSERT(m_aPageStart.GetSize() == 0);
    m_aPageStart.RemoveAll();
    m_aPageStart.Add( 0 );
//    SetupStartCol( pDC, pInfo );

    int nCurPage = pInfo->m_nCurPage;
    pInfo->m_nCurPage = 65535;
    if ( PaginateTo( pDC, pInfo ) )
    {
        pInfo->SetMaxPage( (int)m_aPageStart.GetSize() - 1 );
    }
    pInfo->m_nCurPage = nCurPage;
}

If you add multipages to calendar print, please provide what would be done so with calendar, please add PaginateTo function.

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 6:56am

As you can see - it works because I use ForcePagination mode in Report case

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 6:58am

mdoubson wrote:

As you can see - it works because I use ForcePagination mode in Report case

Yes, i see. Please add PaginateTo function to CalendarView.

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: zitz
Date Posted: 19 August 2009 at 7:24am

What about Scale Max Time == (DATE)1.0 (or 24:00) ???
I use m_dtTimeScaleMax = (DATE)1.0, because i want see all scale, if m_dtTimeScaleMax < (DATE)1.0 i does not see the last cell.
m_dtTimeScaleMax is public now, try to set it

m_dtTimeScaleMax = (DATE)1.0;

and than push print preview, and you can see what works wrong if print and/or if you exit print preview mode.

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 7:30am

As you can see in MFC source update - I tried your code without effect - now it commented. Find better way please

Let's better change TimeScale draw for last cell in this case (but in any cases we will never draw 24 as number - this is not logical - it still < restriction)

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 8:37am

mdoubson wrote:

As you can see in MFC source update - I tried your code without effect - now it commented. Find better way please

Let's better change TimeScale draw for last cell in this case (but in any cases we will never draw 24 as number - this is not logical - it still < restriction)

Previously used without a twinge of conscience, and now will not? You understand that we will all work to alter the events?
The problem is that if you move an event at this time that he has not 19.08. 2009 23:30 - 19.08. 2009 23:59 and 19.08. 2009 23:30 - 20.08. 2009 00:00. Because you are so on the calendar was originally built - the lower limit and upper limit. Everything is working! Now you offer me to redo all of your new concept, right?
Neither have nowhere to draw the number 24! If you're worried about that in the options, for example, when printing, will be 23:00 and then 24:00, then 23:00 so do 00:00 (which actually would be 24:00, ie the beginning of the next day). My users do not care what is written 24:00.
The very scale of 24 we never see, as we see the number 18 will be selected if the range of 16 to 18. What is the problem then? Everything seems to work well, for everybody, and bang! Now, you guys will all work on another ...
Why do you print the other band displays? So on this I see only one explanation, the printing made by another person who does not understand how everything works.
The solution is simple (see code)
And when the press must take into account that m_dtTimeScaleMax may well be 1.0, in all the other code that takes into account (I showed the pieces of code above), it is not only the new features in the printing.
Put file XTPCalendarDayView.cpp, re build the library and you will see that everything works perfectly. void CXTPCalendarDayView::SetScaleMaxTime(const COleDateTime dtNewScaleMaxTime)

{
    if (dtNewScaleMaxTime.GetStatus() == COleDateTime::valid)
    {
        m_dtTimeScaleMax = dtNewScaleMaxTime;
        if ( m_dtTimeScaleMax.m_dt != 1.0 ) m_dtTimeScaleMax = CXTPCalendarUtils::ResetDate( m_dtTimeScaleMax );
        CXTPCalendarControl::CUpdateContext updateContext(m_pControl, xtpCalendarUpdateRedraw);
    }
}

Here is XTPCalendarDayView.cpp
uploads/20090819_083349_XTPCalendarDayV.zip - uploads/20090819_083349_XTPCalendarDayV.zip
I am confused at your patches, so that the version calendar I use now:
uploads/20090819_083733_Calendar.zip - uploads/20090819_083733_Calendar.zip

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 9:00am

What are you talking about - Previously used without a twinge of conscience? I tried it TODAY and after it not help and still give invalid data - COMMENTED IT. Old Printing Code was very functional-poor - supported only one page with very little detailes as use only one mode - 30min interval.

There is nothing in print code related to DayView modificaionts. Everybody who asked to have detailed DayView printout (multi-pages) happy.

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 9:02am

With my patch all works fine, but one thing
If i choose print range from 22:00 to 23:00, why it printed from 22:00 to 24:00 (23:59:59)? Hm... always adds one hour to the upper range

i dont understand. How print from 21:00 to 22:00?

mdoubson wrote:

Btw - I like the fact our Forum site now supported cyrillic - how you print it - directly in Form?

Yes, directly in Form.

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 9:06am

I feel that "the more is the better"

-------------
Mark Doubson, Ph.D.

Posted By: zitz
Date Posted: 19 August 2009 at 9:10am

mdoubson wrote:

I tried it TODAY and after it not help and still give invalid data - COMMENTED IT.

Where it gives the wrong result? How can I repeat it?

mdoubson wrote:

Old Printing Code was very functional-poor - supported only one page with very little detailes as use only one mode - 30min interval.

There is nothing in print code related to DayView modificaionts. Everybody who asked to have detailed DayView printout (multi-pages) happy.

I also want a multi-pages, but unfortunately this feature is not working correctly. Please, experiment with different intervals: in one case, prints two pages when you do not need, n another case, print one page when it needs to the two.

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: zitz
Date Posted: 19 August 2009 at 9:16am

-------------
Xtreme ToolkitPro v13.1.0, static, VC++6

Posted By: mdoubson
Date Posted: 19 August 2009 at 9:25am

I don't consider crazy cases somebody want to print 1 hour only -

-------------
Mark Doubson, Ph.D.

Posted By: mdoubson
Date Posted: 19 August 2009 at 10:53am

There is no problem to print 1 hour range (like this [22:30 - 23:30])- except [23-24] one:

-------------
Mark Doubson, Ph.D.

Posted By: mdoubson
Date Posted: 19 August 2009 at 1:56pm

Here fixed code covered 24:00 as feasible strict ( < ) ScaleMaxTime

https://forum.codejock.com/uploads/DemoVersion/CalendarDemoStatic.rar - https://forum.codejock.com/uploads/DemoVersion/CalendarDemoStatic.rar

https://forum.codejock.com/uploads/DemoVersion/CalendarControlMFCUpdated.rar - https://forum.codejock.com/uploads/DemoVersion/CalendarControlMFCUpdated.rar

As we are going to release 13.2 sometimes in September - please try to test and help to improve our Calendar

(all links already had 13.2 "beta" code - please try and give some feedback)

-------------
Mark Doubson, Ph.D.