CXTPStatusBar indicatioproblem in modalless dialog

Hi,
I have problem with CXTPStatusBar in my application. My application is SDI with statusbar. There is a typical content i.e. status message on the left side and status keys (NUM, CAPS, SCRL) indication on the right side. The trouble is that I need to run modalless dialogs with statusbar and same indication too. If these dialogs were in separate (dialog based) application everything was ok. But from specific reasons I need to use this dialog directly from my application and it doesn't work. The big problem is, that status keys (NUM, CAPS, SCRL) indication doesn't work properly but status message works nearly fine (status message is successfully changing but it isn't filled when the dialog is started). I use the same code so I don't know what's wrong. My dialog is based on CXTPDialogBase<CXTResizeDialog>.

I have defined static UINT indicators[] =
{
    ID_SEPARATOR,           // status line indicator
    ID_INDICATOR_CAPS,
    ID_INDICATOR_NUM,
    ID_INDICATOR_SCRL,
};

I create statusbar in OnInitDialog() by:
if (!m_wndStatusBar.Create(this) || !m_wndStatusBar.SetIndicators(indicators, sizeof(indicators)/sizeof(UINT)))
    {
        TRACE0("Failed to create status bar\n");
        return -1;      // fail to create
    }

and use m_wndStatusBar.SetPaneInfo(0, ID_SEPARATOR, SBPS_STRETCH, 100); in OnInitDialog() too.

I use the connection in messagemap:
ON_UPDATE_COMMAND_UI(ID_INDICATOR_CAPS, OnUpdateKeyIndicator)
ON_UPDATE_COMMAND_UI(ID_INDICATOR_NUM, OnUpdateKeyIndicator)
ON_UPDATE_COMMAND_UI(ID_INDICATOR_SCRL, OnUpdateKeyIndicator)

and the update routine:
void CMyDlg::OnUpdateKeyIndicator(CCmdUI* pCmdUI)
{
    UINT nVK;
    UINT flag = 0x0001;

    switch (pCmdUI->m_nID)
    {
    case ID_INDICATOR_CAPS:
        nVK = VK_CAPITAL;
        break;

    case ID_INDICATOR_NUM:
        nVK = VK_NUMLOCK;
        break;

    case ID_INDICATOR_SCRL:
        nVK = VK_SCROLL;
        break;

    default:
        TRACE1("Warning: OnUpdateKeyIndicator - unknown indicator 0x%04X.\n",
            pCmdUI->m_nID);
        pCmdUI->ContinueRouting();
        return; // not for us
    }

    pCmdUI->Enable(::GetKeyState(nVK) & flag);
        // enable static text based on toggled key state
    ASSERT(pCmdUI->m_bEnableChanged);
}

I don't see something missing or extraordinary but OnUpdateKeyIndicator() isn't called. I tried to off the status key indication in the main application but without effect in this dialog... Can you help me please?

Thank you beforehand for each suggestion.

Lajbr

P.S.: I don't know if it's important but I use Codejock v10.4 and VS2005.

Hi Lajbr;