Toolkit Pro - Tried to upgrade from 8.61 to 8.70

Print Page | Close Window

Tried to upgrade from 8.61 to 8.70

Printed From: Codejock Forums
Category: Codejock Products
Forum Name: Toolkit Pro
Forum Description: Topics Related to Codejock Toolkit Pro
URL: http://forum.codejock.com/forum_posts.asp?TID=620
Printed Date: 19 April 2024 at 6:49pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Tried to upgrade from 8.61 to 8.70

Posted By: Ark42
Subject: Tried to upgrade from 8.61 to 8.70
Date Posted: 14 April 2004 at 12:27am

But it failed because I apparently have zero installations left? Great.
Don't use active authentication if its not flawless. This creates a lot of extra work that should NOT be needed to install the product.

Replies:

Posted By: flauzer
Date Posted: 14 April 2004 at 3:07am

The same in AX Suite Product. 0 installations left.......I think that this is an error.

the latest security policy does not seem excessive during install?

Posted By: Ark42
Date Posted: 14 April 2004 at 12:19pm

Yes, it does seem very excessive and intrusive. The proper way to handle such a setup would be to always allow the installations, no matter what, but flag ones that go over the limited they think it should have. Then they can manually look into the ones over the limit and disable the username or code or whatever if they need to.
I purchased one license of 8.60 and installed that once. I then upgraded to 8.61 and installed that once. Now I can't upgrade to 8.70 even though I paid for the year subscription because of why? Because I used my one single installation up on 8.61, or because of a big oversight in their system? I emailed them yesterday and still no response. You think something like this should get PRIORITY responses from them. I can't use what I paid for and this is a BIG problem.

Posted By: kstowell
Date Posted: 14 April 2004 at 3:48pm

Hello -

The latest version 8.70 was posted late last night and the problem you are referring to with the license server was not discovered until later this morning. We take matters such as this very seriously and make it our top PRIORITY to resolve them quickly.

This problem has been corrected and we apologize for any inconvenience that this may have caused you. You should be able to install the version you downloaded now without any trouble. Please let us know if you have further problems. The product release will be officially announced later this evening.

Kind regards,
Codejock Support

Posted By: Ark42
Date Posted: 14 April 2004 at 4:22pm

Installed 8.70 now, but deployment wizard fails:
XTP8700Libd.dll - 358 error(s), 7 warning(s)

I am using VC6 + SP6, chose all build options (DLL, both static options, and both ansi and unicode).

I see no files in C:\Program Files\Codejock Software\MFC\ToolkitPro\bin_vc60 or C:\Program Files\Codejock Software\MFC\ToolkitPro\lib_vc60 that start with XTP8700 now.

Posted By: kstowell
Date Posted: 14 April 2004 at 9:17pm

Hi Ark42,

All of the reported problems have been resolved, sorry for the trouble. Please download the latest version that was just posted. Please let us know if you experience any problems, thanks.

Kind regards,

-------------
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<

Posted By: Ark42
Date Posted: 14 April 2004 at 9:29pm

I just redownloaded 8.70 and installed, and the deployment wizard failed in the same way. Where is the log stored at?

Posted By: kstowell
Date Posted: 14 April 2004 at 9:47pm

There should be a *.plg (if using vc6) file located in either:

C:\Program Files\Codejock Software\MFC\ToolkitPro\WorkSpace\XTPToolkit_Dll or
C:\Program Files\Codejock Software\MFC\ToolkitPro\WorkSpace\XTPToolkit_Lib

please attach and send to me via email.

Regards,

-------------
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<

Posted By: kstowell
Date Posted: 14 April 2004 at 9:51pm

Please verify the following:

Make sure you have COMPLETELY uninstalled any previous versions first before installing version 8.70, DO NOT install over top of your previous installation.

-------------
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<

Posted By: Ark42
Date Posted: 14 April 2004 at 10:21pm

Uninstallation told me some pieces would have to be done manually, but once I just deleted the whole Codejock Software folder from Program Files, then reinstalled, the deployment wizard went just fine.

Posted By: kstowell
Date Posted: 15 April 2004 at 9:41pm

Hello-

The final version of 8.70 was just posted tonight, please be sure you download this latest version. This version will correct the problem mentioned here in addition to a few other issues there were remaining.

Regards,

-------------
Kirk Stowell, President and CEO
CODEJOCK SOFTWARE SOLUTIONS<